APMF1851KComplete Flex Head Rebuild Kit3Drive shaft, die spring, poly cords, and hardware
APMF1818Re-enforced Rubber Diaphragm31 per head
APMF0316Drive Shaft for Head Rebuild1Replacement steel drive shaft only
APMF0317Drive Spring1Replacement die spring only
GPPT0392Complete Flex Head Assembly 11″1Replacement Flex Head for all G320 and G290 grinders (cross complete not included)
APMF1663Complete Flex Head Assembly 9″1Replacement Flex Head for all G250 grinders (cross complete not included)
APMF1199Cross Complete13 fingered clover with center spinner to lock plates to the bottom of the heads
GPPT0190Wheel and Tire Assembly1Replacement foam filled tire mounted on wheel with bearings for all G320 and G250 grinders
APMF0254G320 Main Pulley Belt1Replacement single-sided ribbed Gates belt for inside the main pulley drum for all G320 grinders
GPPT0296G290 & G250 Main Pulley Belt1 Replacement single-sided ribbed Gates belt for inside the main pulley drum for all G290 & G250 grinders
APMF0113Handle Bar Tightener Clamp1Replacement lever to tighten the handlebars in position
APMF1207Tiller Arm Locking Pin1Pin used to secure the tiller arm in position at the frame collar
APMF2219KPulley Rebuild Kit1Kit contains all wear components to rebuild internal slip clutch in G320, G290, & G250 grinders

APMF1596
Centrifugal Clutch1For use on G320PRO propane grinders. Mounts to the engine crank shaft.
APMF1596ACentrifugal Clutch with Sprocket Assembly1 For use on G320PRO propane grinders. Mounts to the engine crank shaft.
APMF3681Centrifugal Clutch1For us on G290PRO & G250PRO propane grinders. Mounts to the engine crank shaft.
APMF3681A Centrifugal Clutch with Sprocket Assembly 1 For us on G290PRO & G250PRO propane grinders. Mounts to the engine crank shaft.
APMF1184Ring Gear G3201Ring gear for use on all G320 series grinders.
APMF1030Ring Gear G2501 Ring gear for use on all G290 & G250 series grinders.
APMF0247Pinion Gear G3201Pinion gear for use on all G320 grinders.
APMF1031Pinion Gear G2501Pinion gear for use on all G290 & G250 grinders.
APMF6375Pulley Shaft for Pinion Gear1Main pulley shaft to accept pinion gear for all current CPS planetary grinders.
APMF4304Pulley Shaft without Pinion Gear1Main pulley shaft without pinion gear for all current CPS planetary grinders.
APMF6005Regulator for G320PRO1Regulator assembly for G320PRO. Includes fuel shutoff solenoid ad brass elbow. *Hose sold separately
APMF435645″ Propane Hose145″ long propane hose with fittings for G320PRO
APMF3723Pressure Gauge1Digital pressure gauge to set PSI on G320PRO regulator.
APMF3684Regulator 1Complete regulator assembly for G290PRO, G250PRO, and CAT5 PRO